Soda Machine Adapter Hose Connect Your Soda Maker to Large Co2 Tank Directly,Compatible with Jet and Aua Fizz Soda Machines, Not Recommended for Electronic 1 Touch/Terra/Duo/Art Series

Specification:Hose length: 60 Inch/150cmWorking pressure: 5000 PSIThread For Large CO2 Tank: CGA320 G1/2-14.Instructions:1.Screw the CGA320 Nut to large CO2 gas cylinder and tighten it by wrench;2.Remove the black adapter from the quick coupler firstly,and screw it onto the soda machine by wrench,then connect the quick coupler;3.Open the valve of the large gas bottle;4.Done,you can enjoy your sparkling water.if you want unscrew the pin valve from the machine:1.Close valve of the large gas bottle;2. Press the machine button several times to let the gas out, otherwise the o ring in coupler will be blowed out.3.Disconnect the quick coupler.Please pay attention:Our unit works with GAS CO2 only, not liquid CO2. liquid CO2 will create a bad taste in your drink.

• Compatibility: This soda maker adapter is compatible with the Jet and Aua Fizz soda machine series, allowing the use of a standard CGA-320 large CO2 tank in most soda machines. Not compatible with Electronic One Touch/Terra/Duo/Art soda machine.
• Cost-Saving: This product enables users to connect their soda machine to a larger CGA320 CO2 tank , saving them money on refill costs by utilizing 5lb, 20lb, or 50lb commercial CO2 tanks.
• High-Quality Hose: The DN3 6mm Microbore Hose is 5ft (1.5 meters) long, made of high-pressure, very soft, and food-grade materials with no odor.
• International Compatibility: This soda water accessory is suitable for use with CGA320 valves of CO2 tanks in various countries, including the USA, Canada, Brazil, Colombia, and the Philippines. However, users should check their CO2 value before purchase as it cannot work with RPV-value (residual pressure value) or W21.8 valves(EU standard).
• Safety Precautions: When using this product, it is essential to avoid disconnecting the coupler while under pressure to prevent damage to the o ring in the socket (female QD and black adapter). Instead, users should use a wrench to unscrew the nut from the tank if they want to drain the residual pressure.